Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Why Alpharetta Homeowners Choose Trane Air Duct Cleaning
We provide Trane repair in Alpharetta as an independent air duct cleaning service, from Windward to Crabapple, and what sets our work apart is simple: we know how Trane systems behave when local red clay dust, spring pollen, and summer humidity get into the ductwork. Trane builds equipment that moves a lot of air, and when that air moves through dirty flex runs, caked blower wheels, or a fouled evaporator coil, the system works harder and the house pays for it. As an independent Trane service provider, we are not affiliated with or authorized by Trane, but our technicians service these systems every week and see the exact failure patterns that generic duct cleaners miss. Call (762) 263-0408 if your Trane system is not breathing the way it should.
Why Trust Mortons Air Duct Alpharetta for Your Trane Air Duct Cleaning?
Paul Adeyemi picked up his trade fundamentals at Los Angeles Trade-Technical College before planting roots in the greater Atlanta area, and he has spent years crawling Alpharetta attics and basements where Trane in Lawrenceville and surrounding areas keeps homes comfortable. Paul’s crews have serviced plenty of two-story homes in the Windward community, where long duct runs and finished basements leave no room for shortcuts. A Trane air handler buried in a tight attic chase still needs its blower pulled, its coil inspected, and its return plenum checked for leaks, and that is exactly the kind of job we do without rushing.
We work on Trane equipment directly, not through a dealer program, so our recommendations come from what we actually see inside the cabinet, at the coil, and along the duct runs. Our techs know the XR and XL platforms well enough to spot a blower wheel caked with Georgia red clay dust before the homeowner notices the vibration. We also know when a Trane variable-speed air handler is throwing airflow fault codes because a flex run collapsed over a truss chord, not because the motor is failing. That distinction saves Alpharetta homeowners real money, and it is why our Air Duct Cleaning for Trane systems does not read like a generic page with a brand name swapped in. We carry Rotobrush and Nikro equipment on every Trane job, and every visit includes shoe covers, drop cloths, and a written price before we touch anything.
Styles & brands we work with
Common Trane Air Duct Cleaning Problems We Fix in Alpharetta
Every brand has its failure patterns, and Trane is no different. In Alpharetta’s humid subtropical climate, these are the five we see most often:
- Blower wheels packed with red clay dust on XR and XL series air handlers. Leaky return ducts pull fine Georgia red clay and pollen into the cabinet, and the blower wheel becomes a dust magnet. The result is imbalance, vibration, and a system that sounds like it is straining. We clean the wheel, seal the return leaks, and the system quiets down.
- Spine Fin outdoor coils losing efficiency on wooded Alpharetta lots. Trane’s Spine Fin coils are durable, but north-facing walls in neighborhoods like Crabapple collect pollen, mold, and organic debris that block heat rejection. When the coil can’t reject heat, head pressure climbs and cooling suffers. We clean these coils carefully, because the aluminum spines bend if you look at them wrong, and a bent Spine Fin coil never performs the same again.
- Collapsed or kinked flex duct starving Trane variable-speed air handlers. Attic installations are common in Alpharetta homes built from the 1980s through the 2010s, and flex duct that sags over a truss or gets crushed by a box of holiday decorations stops airflow dead. Trane variable-speed units respond by throwing airflow fault codes and short cycling. We find these with video inspection and replace the crushed runs.
- Mold on evaporator coils during high-humidity months. When Trane ComfortLink dehumidification is disabled or the humidity setpoint is left too high, moisture sits on the coil and mold gets a foothold. Homeowners notice a musty smell when the AC cycles on. We clean the coil, check drain pan slope, and walk the homeowner through the right humidity settings for a Georgia summer.
- Fiberglass insulation debris from deteriorating duct liner. Older Alpharetta duct systems – especially in homes built in the 1980s and 1990s – often have internal fiberglass liner that breaks down over time. That pulverized fiberglass ends up on the blower wheel, the coil, and in the air stream. We document it with video inspection so the homeowner sees exactly what we see before we clean it out.
Trane Parts & Our Repair-vs-Replace Approach
When a Trane system needs parts, we are honest about what matters and what does not. For items where a serial-number match is critical – air filters, coil cleaners, access panels – we specify genuine Trane parts. For flex duct, mastic, and insulation, high-quality OEM-equivalent materials from reputable suppliers work every bit as well and cost less, because longevity on those items is not brand-dependent. That is not corner-cutting; that is knowing where brand matters and where it does not.
On the repair-vs-replace question, we tell you straight. If a duct run is so collapsed or perforated that sealing it would cost more than new flex, we price both options and let the homeowner decide. Paul’s signature phrase on this is simple: “I’ll tell you what I see, tell you what it costs, and then I’ll get to work – in that order, every time.” If a Trane blower motor is failing, we say so; if a good cleaning brings it back, we say that instead. Call (762) 263-0408 and we will give you the same straight answer about your system.
Our Trane Service Process – Step by Step
Every Trane job in Alpharetta follows the same sequence, and we walk you through it before we start:
- 1
System walkthrough and video inspection. We open the air handler, check the filter, inspect the coil, and run a camera through the supply and return plenums. You see what we see, in real time, before any work is quoted.
- 2
Written quote with a flat price per system. We tell you exactly what the job costs before we touch anything. No per-vent pricing games, no surprises on the invoice. The price we quote is the price you pay.
- 3
Cleaning and repair. We clean the blower assembly, evaporator coil, supply plenum, return plenum, and accessible duct runs using Rotobrush and Nikro equipment. If we find collapsed flex or leaking mastic, we repair or replace as quoted.
- 4
Post-service testing. We run the system through a full cycle, check static pressure and airflow at the registers, and make sure the Trane air handler is not throwing fault codes.
We also verify the system is moving air the way Trane designed it to, not just that the ducts look cleaner. Our 365-Day Done Right Promise backs the work: if it is not right, we make it right. Full stop.
See the difference
Before
After
Before
After
Before
AfterTrane Products We Service & Install in Alpharetta
Our Alpharetta technicians work on the full range of Trane residential equipment, including the XR series (XR13 through XR16), XL series (XL16i, XL18i, XL20i), RunTru by Trane (A4HP and A4AC), and the high-end XV series (XV18, XV20i, XV19). We also handle Trane variable-speed air handlers paired with two-stage and modulating compressors. Locally, we stock common Trane replacement filters, coil cleaners, flex duct, mastic, and insulation so most Alpharetta jobs can be completed in a single visit. For serial-number-specific parts, we order directly and schedule the return trip around your family’s routine.
We Also Service These Brands
While this page focuses on Trane because Alpharetta homeowners ask about it most, our crews service Lennox and Carrier systems too. The failure patterns differ – Carrier coils have their own quirks, Lennox blowers their own – but the discipline is the same: video inspection first, written price second, flat quote honored to the penny. If you have a mixed-brand house, we can service the whole property in one visit.
FAQs – Trane Air Duct Cleaning Service in Alpharetta
Restricted airflow shows up as rooms that never quite cool, a system that runs longer than it used to, or a blower that sounds like it is working harder than it should. On Trane XR and XL air handlers, the tell is often a blower wheel coated in fine dust and spider webs, plus flex runs that have sagged in the attic. Our video inspection confirms it in minutes, and the written quote tells you exactly what it costs to fix. Call (762) 263-0408 for an inspection – estimates are free.
Yes, and we see it every summer. When return ducts are blocked or collapsed, the Trane air handler can’t move enough air across the evaporator coil, which causes the compressor to work against higher pressure and eventually trip a thermal limit. It is especially common in Trane Air Duct Cleaning in Johns Creek, GA and nearby Alpharetta homes where flex duct has been crushed in attics or where returns are undersized for a large two-story floor plan. Cleaning the ducts and repairing the collapsed runs usually restores proper airflow and stops the short cycling.
Trane does not publish a single approved duct cleaning method, which is why the contractor’s skill matters more than the brand. For variable-speed systems like the XV18 or XV20i, the blower ramps slowly and precisely, so even moderate duct restrictions throw off performance. We use source-removal cleaning with Rotobrush and Nikro equipment, which pulls debris out rather than pushing it deeper into the run, and we always clean the blower assembly and evaporator coil as part of the job.
That musty smell is almost always mold or mildew on the evaporator coil, which develops during Alpharetta’s humid months when the coil stays wet between cycles. On Trane systems with ComfortLink controls, the dehumidification setting is often disabled or set too high, so the coil never fully dries. We clean the coil, check the drain pan, and help you set the humidity controls correctly for Georgia’s climate. The smell goes away and the air in the house changes.
It often does, especially on Trane two-stage and variable-speed systems. These platforms are designed to run long, low cycles, and they are particularly sensitive to restricted airflow. A dirty blower wheel, a clogged coil, or collapsed flex duct all force the system to work harder for the same cooling. After a full system cleaning and duct repair, many Alpharetta homeowners notice the system reaches setpoint faster and runs quieter.
Trane air duct cleaning in Alpharetta typically runs between $450 and $900 for a full system, depending on the size of the house, the number of HVAC systems, and how much of the ductwork can be reached from the attic or basement. Larger custom homes with multiple zones and finished basements tend toward the upper end because there is simply more duct to clean. We quote one flat price per system before any work starts, and that price does not change when the job is done. Call (762) 263-0408 for an exact quote – estimates are free.
Book Your Trane Service in Alpharetta, GA
If your Trane system is not moving air the way it should, or you just want a second set of eyes on the ducts before allergy season peaks, call Mortons Air Duct Alpharetta at (762) 263-0408. We will schedule a video inspection, give you a written flat price, and leave your home cleaner than we found it – with the photo to prove it.
Written by Paul Adeyemi, Owner at Mortons Air Duct Alpharetta, serving Alpharetta since the company’s founding in 2005.